 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| 9mm Diameter Water-proof with Round Terminals (Radial Type) SKRC Series A round terminal type with highly efficient PC board mouting with excellent dustproof and water-proof performance. Detector Push Slide Rotary TACT SwitchTM Product Line Product No. SKRCACD010 SKRCADD010 Operating Operating force direction 1.57N Vertical 2.55N 0.25 Travel mm Rating max. 50mA 12V DC Rating min. 10BA 1V DC Operating life 5mA 5V DC 100,000cycles Initial contact Minimum order unit Stem color resistance pcs. 500m max. Dark gray 900 Red Encoders Power Dual-in-line Package Type TACT SwitchTM CustomProducts Specification of Radial Taping Package (Taping Packaging for Auto-insertion) Box Size Unit:mm Number of packages pcs. !% 1 box 1 case /Japan 1 case /export packing !!% 900 9,000 9,000 ## Dimensions Style 12.7 Stem Unit:mm PC board mounting hole dimensions Viewed from switch mounting face Sharp Feeling Soft Feeling Snap-in Type Surface Mount Type Radial Type o9 o3.8 o0.5 13 10 2 1 18 2o1 5 ho le s 5 18 12.7 o4 Circuit Diagram 1 2 Water Resisting Performance Temperature of water Depth of water Immersion duration 60 10cm 240h Notes 1. 2. 3. 4. Please use 1.6mm thick PC boards. Switch terminals must be coated thoroughly until the terminals are all hidden. For more information on coating material, Please contact us. Please place purchase orders for taping products per minimum order unit (1 reel or a case). 9 Refer to P.306 for soldering conditions. 295 TACT SwitchTM List of Varieties Sharp Feeling Type Series Detector Push Type Slide Features Rotary Encoders Power W Dual-in-line Package Type TACT SwitchTM H CustomProducts Operation force coverage 5N Ground terminal Operating temperature range Electrical performance Durability Insulation resistance Voltage proof Vibration Lifetime Cold Dry heat Damp heat Page 289 290 291 60 480 2 20 to 30 100M 70 to SKRV/QK 85 1.25 1.5 3.3 4 5 7.1 4.3 5 7.1 13 3.5 3.9 3.55 4.5 6.45 6.4 7.35 10 V6.2 6.6 6.85 7.5 7.3 V9 Low-profile Horizontal type Surface mount Horizontal type 4-direction switch switch push Round terminal type Radial Round terminal Water-proof Horizontal type SKSC SKRE SKRT SKRV SKRH SKQU SKRG SKQK SKQN SKRC Photo Dimensions mm Operating direction Vertical Horizontal D 1N See the relevant pages for respective product descriptions Sharp Feeling Soft Feeling Snap-in Type Surface Mount Type Radial Type min. 100V DC 250V AC for 1min. SKSC/RE/RV/RH : 100V AC for 1min. 10 to 55 to 10Hz/min., the amplitude is 1.5mm for all the frequencies, in the 3 direction of X, Y and Z for 2hours respectively Shall be in accordance with individual specifications. 30 80 2 2 for 96h for 96h Note The automotive operating temperature range to be individually discussed upon request. Environmental performance , 90 to 95%RH for 96h 481 482 292 294 293 295 W Width. The most outer dimension excluding terminal portion. D Depth. The most outer dimension excluding terminal portion. H Height. The minimum dimension if there are variances. 250 TACT SwitchTM Soldering Conditions Condition for Reflow Available for Surface Mount Type. 1. Heating method: Double heating method with infrared heater. 2. Temperature measurement: Thermocouple 0.1 to 0.2 Detector Push Slide Rotary Encoders Power CA K or CC T at solder joints copper foil surface . A heat resistive tape should be used to fix thermocouple. 3. Temperature profile Temperature (C ) 260C max. 3 sec max. 180 150 Time 230C Dual-in-line Package Type TACT SwitchTM 40s max. 3 to 4min. CustomProducts Time inside soldering equipment Note 1. The above temperature shall be measured on the mounting surface of a PC board. There are cases where the PC board's temperature greatly differs from that of the switch, depending on the material, size, thickness of PC boards and others. The above-stated conditions shall also apply to switch surface temperatures. 2. Soldering conditions differ depending on reflow soldering machines. Prior verification of soldering condition is highly recommended. Sharp Feeling Soft Feeling Snap-in Type Surface Mount Type Radial Type Conditions for Auto-dip Available for Snap-in Type and Radial Type Except SKHJ, SKHL, SKQJ, SKQK, SKEG series Items Flux built-up Condition Mounting surface should not be exposed to fluk Ambient temperature of the soldered surface of PC board. 100 max. 60s max. 260 max. Manual Soldering Except SKRT Series Items Soldering temperature Duration of soldering Capacity of soldering iron Condition 350 max. 3s max. 60W max. Preheating temperature Preheating time Soldering temperature Duration of immersion Number of soldering 5s max. 2times max. Notes 1. 2. 3. 4. 5. Consult with us for availability of TACT SwitchTM washing. Prevent flux penetration from the top side of the TACT SwitchTM. Switch terminals and a PC board should not be coated with flux prior to soldering. The second soldering should be done after the switch is stable with normal temperature. Use the flux with a specific gravity of min 0.81. EC-19S-8 by TAMURA Corporation, or equivalents. 306 |
Price & Availability of SKRCACD010
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |